This is a dual cpld board.
This is an adapter I made for a USB to serial port board.
This is a board using a Sharp LH79520. It is programmed through a JTAG adapter.
A board used for interfacing a Sony LCD display from Goldmine Electronics to an FPGA board from Digilent.
A couple of switching power supplies. One is 1.8V and the other is 3.3V. This was used with the Sharp LH79520 board.
A board for experimenting with white LED's.
An adapter board for a Xess FPGA board. I love experimenting with FPGA's. There is not much you can't do with one. This board was configured to run an OR32 and was able to boot linux.